Owner
Dalton Snyder
Owner, Eagle Mountain Basement Mold Removal
Owns this service. Background in insurance for environmental contractors and home inspectors.
Lehi, Utah · Utah Valley University
On this page
What We Do
We remove mold from basements in Eagle Mountain, Utah, and we fix the moisture problem that caused it. Most of the homes we see were built after 2000 and have finished basements: drywall, carpet over a concrete slab and fiberglass insulation behind the walls. When water reaches those materials and stays for more than a day or two, mold starts on the paper face of the drywall and on the carpet pad, usually out of sight.
Our work covers the whole chain: finding the water source, sealing off the work area, removing materials that cannot be cleaned, HEPA-cleaning what stays, drying the structure and confirming the result. If you want the full picture of the service, start with our basement mold removal service in Eagle Mountain overview.
Most jobs start with a basement mold inspection in Eagle Mountain, so the scope is clear before any wall is opened.
How a Job Works
- Free inspectionA technician checks the affected area with a moisture meter and, where useful, a thermal camera, and traces the water source.
- Written plan and priceYou get a written scope: what is removed, what is cleaned, how long it takes and what it costs. Nothing starts without your approval.
- RemediationContainment, removal, HEPA vacuuming, damp wiping and drying, following the ANSI/IICRC S520 standard and EPA mold cleanup guidance.
- Moisture fixThe leak, window well, grading or humidity problem is repaired or a fix is recommended, so the mold has no reason to return.
- VerificationA visual check and moisture readings confirm the area is clean and dry. Independent clearance testing is available on request.
Each step follows a containment-first mold remediation method, and the price you approve in step two is the price you pay unless we stop and show you hidden damage first.
Who Runs This Service
This service is owned by Dalton Snyder of Lehi. His background is insurance for environmental contractors and home inspectors, which is why every job here is built around a written scope, photos and moisture readings that an adjuster or a future buyer can rely on. Read Dalton Snyder's owner profile for his full background.
The field work is done by an independent local contractor (see the note below), while pricing and paperwork run through one local owner, so you are not passed between a call center, a franchise office and a subcontractor.
What We Promise — and What We Don't
A written price first
You see the scope and price in writing before any work starts. If hidden damage changes the scope, we stop and show you before going further.
Honest scope
If your problem is small enough to clean yourself, we tell you. The EPA says many patches under about 10 square feet are a homeowner job.
No scare tactics
Mold is a moisture problem first. We explain health risks using EPA and CDC guidance, not fear.
Photos you keep
Before, during and after photos you can keep for insurance claims or a future home sale.
Credentials: the inspection and remediation work is performed by an independent local contractor, who is named on your written estimate before any work is booked. Ask for proof of liability insurance and any certifications before work starts — any good mold contractor will show you both.
Our Editorial Standards
Every guide and service page on this site is written by Jonathan Hernandez, who has worked in Utah water and mold mitigation, decontamination and property testing since 2017. His field experience and the guides he has written are listed in Jonathan Hernandez's writer profile. Pages are written for Eagle Mountain homeowners and checked against the source that governs each kind of fact before they are published:
- Mold cleanup and health: EPA mold and moisture guidance and CDC mold pages. Health statements go no further than those agencies do, and nothing here is medical advice.
- Work methods: the ANSI/IICRC S520 standard for mold remediation and S500 for water damage restoration.
- Prices: typical U.S. market ranges from published cost guides. The source and month appear under each cost table, and ranges are reviewed when prices change.
- Local facts: Eagle Mountain City, Utah County and local news reports, cited on the page where they are used.
- Licensing and Utah law: the Utah Division of Professional Licensing, the Utah Division of Real Estate and the Utah Code.
Each page lists its sources at the bottom and shows the date it was last updated at the top. Details about this business are limited to facts you can check, such as our address and the owner's public LinkedIn profile, so you will not find invented reviews, ratings, awards or credentials here.
Found something wrong or out of date? Send the page address through our contact form. We check the claim against its source and, if it needs a fix, correct the page and update its date.
Frequently Asked Questions
Who owns Eagle Mountain Basement Mold Removal?
Dalton Snyder, based in Lehi, Utah. His background and public LinkedIn profile are on his owner profile page.
Who writes the guides on this site?
Jonathan Hernandez, an Ogden-based restoration and mold mitigation professional who has worked in the field since 2017.
Where are you located?
1790 American Way #4, Eagle Mountain, UT 84005. We serve every Eagle Mountain neighborhood and nearby northwest Utah County towns.
Do you only work on basements?
Basements are our focus, but the same process covers crawl spaces, bathrooms, utility rooms and HVAC systems connected to the basement.
Do you charge for the inspection?
The visual inspection and moisture check are free. Lab sampling (air or surface samples) has a separate fee, which we quote before taking samples.
Will you tell me if I can handle the mold myself?
Yes. Small hard-surface patches with no ongoing leak are often a DIY job, and we will say so and explain how to do it safely.